Description

The Split EX (Extended Reach) unit of the OptiClimate 15000 PRO3 can cover a distance of up to 30 meters between the outdoor and indoor units. The OptiClimate Split EX is supplied with a set of two 15 meter cooling hoses. If a longer hose is required, it can be ordered up to a maximum of 30 meters. For example, if 30 meters of hose is required, this hose must be ordered 15 times (for an extra 15 meters).

Inverter technology allows constant adjustment of air temperature and humidity. Thanks to the Inverter, the OptiClimate can adjust the temperature continuously, without jumps, to keep it at the desired value.

The OptiClimate Inverter responds immediately as soon as it detects a slight difference between the set and actual temperature. Inverter technology prevents the compressor from turning on and off again and again and, in this way, prevents current peaks. In addition, the OptiClimate Inverter consumes less water and energy and maintains more uniform air temperature and humidity values. On the other hand, this technology has a “soft start” system, the compressor is progressively revved and thus a high starting current is avoided.

The OptiClimate Inverter has the peculiarity of being multiphase, that is, the compressor can be connected to both a 230-240V single-phase system and a 400V three-phase system. The Inverter variant is available on all 15,000 models.

Name: OptiClimate 15000 PRO3 Split Inverter EX
Connection voltage: 230-400V
Cooling capacity: 15000W (increase + 8%)
Rated power: 3500W
Phase: 1o3 *
Connection:
three-phase automatic D50 6.0mm2 cable
single phase automatic D35 4.0mm2 cable
Heaters: 3x2700W
Dehumidification capacity: 270 L / 24h **
Size One. Indoor: 121x70x54
Weight Un. Indoor: 150kg
Size One. Exterior: 95x36x123
Weight Un, Outside: 55kg

In two and three-phase connections connect one heater per phase
With a humidity in the air of 80% and an ambient temperature of 30ºC

Additional information